SoftHub

Form Factor:

- Dimensions: 3.5" SBC (5.8-in x 4.0-in)/ ( 146 x 102 mm)

Processor System:

- CPU: BGA type for Intel Core i5-4300/Celeron 2980U mobile, processor (Haswell ULT MCP )Default 2980U Dual core MCP

Expansion Slot:

- PCI: 0
- Mini-PCIe: 1 (Half Size) + 1 (Full Size ) shared with mSATA
- mSATA: 1 (Full Size ) shared with SATA2
- PCIe: 0
- CFast Card Socket: 0

Memory:

- Technology: Single Channel DDR3L 1333/1600 MHz SDRAM
- Max.: 8GB
- Socket: 1 x SO-DIMM

Graphics:

- Controller: Intel HD Graphics (By CPU)
- VRAM: Shared Memory
- VGA: 0
- LVDS: 1 co-lay with eDP
- HDMI: Supports HDMI 1.4a, supported with Level Shift, resolution up to 4096x2304 (1x HDMI)
- DVI: 0
- DisplayPort: 0
- MultiDisplay: Yes(Three Display)

Ethernet:

- Ethernet: 10/100/1000 Mbps
- Controller: GbE LAN1: RTL8111G , LAN2: Intel I218LM (4300U SKU), GbE LAN1: RTL8111G , LAN2: Intel I218V (2980U SKU)
- Connector: 2 x RJ 45

SATA:

- Max Data Transfer Rate: SATA3 (6.0Gb/S)

Rear I/O:

- VGA: 0
- DVI: 0
- HDMI: 2
- DisplayPort: 0
- Ethernet: 2
- USB: 4 x USB 3.0
- Audio: 0
- Serial: 0
- eSATA: 0
- PS2: 0

Internal Connector:

- USB: 4 (2 x USB Header 2.54mm pitch)
- LVDS / inverter: 24 bit dual channel LVDS co-lay with eDP
- VGA: 0
- Serial: 4 ( 2 RS-232/422/485, 2 RS-232)
- SATA: 2 x SATA3 (6.0Gb/s)
- mPCIe: 1
- Parallel: 0
- mSATA: 1(shared)
- IrDA: 0
- GPIO 8-bit: 4 x GPI + 4 x GPO
- SATA PWR Output Con: 1
- Speaker Header: 1

Watchdog Timer:

- Output: Output from super I/O to drag RESETCON
- Interval: 256 Segments, 0,1,2…255 Sec/Min

Power Requirements:

- Input PWR: DC 9-36 input
- Power On: AT/ATX Supported AT : Directly PWR on as power input ready, ATX : Press button to PWR on after power input ready

Environment:

- Temperature: 0ºC – 60ºC