SoftHub

Changes in System BIOS 01.01.0008:

- The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion
- SUT can't boot to RHEL 6.5 x64 when enable "VT for Directed I/O" in BIOS setting.
- Driver Health Protocol (DHP) not working correctly on Wildcat Pass
- Incorrect ACPI table causes NUMA issues in Linux
- System booted with only 1 QPI link trained, no errors reported
- Dual port IB IOM G52882-351 is showed as "single-port" description in BIOS setup menu.
- Display L2/L3 cache error detected on the RAID controller during post
- uEFI iSCSI boot configuration is lost after reboot
- New ESRT2 OpROM and uEFI Driver for Grantley
- New ESRT2 1.43 OpROM for inclusion into Grantley Production BIOS
- SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge
- If Unplug USB scanner and then re-plug scanner back in ,USB s