SoftHub

Resolved Issues In 16.0.2.1086 PV Release:

- OptaneVolume is disabled when downgrading from 16.0.1 to 15.9 driver

- [CLI] Incorrect volume information is seen when Optane Data Drive is enabled

- Waking up from S3/S4/S5 is resulting in Bug Check 1A with 2x NVMe SSD's(2TB) as DATA drives (RST Controlled)

- BSOD SYSTEM_THREAD_EXCEPTION_NOT_HAN DLED (7E) occurred after Optane separation

- "Logs are here" characters are not translated to non-English language in IRST Installation UI.

- RAID 0 performance does not meet expectation with 3 760p drives.

Resolved Issues In 16.0.2.1078 Release:

- Enable Optane in OS, system BSOD occurs after first reboot. (0x7B)

- HDD Abnormal Power off with Optane when entering DS3/S3

- BSOD 0x154 occurred when performing s4 stress with some HDD's.

- Partition created on slow drive in WinPE is not available in OS

- After making all disks spare except Optane volume, system cannot boot again (BSOD:

- SYSTEM_THREAD_EXCEPTION_NOT_HAN DLED (7e))

- CRITICAL_PROCESS_DIED after Optane separation and creation with different drive

- BSOD “Process1 initialization failed” occurred during S4 testing

- BSOD on NVMe drives during Sx cycling

- D1 Bug check in hiber_iastora during S4 cycling

- UNEXPECTED_STORE_EXCEPTION (154) - OS disk disappeared during S4 flow

- IRST UI show Unknown Controller in Hardware info of help page- > System Report in AHCI mode.

- BSOD 0xA0 (HIBERSTACK_INIT_FAILED) occurs when driver is upgraded without reboot and enter S4

- XML validation error on 16.0.0.1048 RST installer mup.xml

- Some words in Intel Rapid Storage Technology UI "Help" page are not localized in Chinese language

- NvmePassthrough VendorSpecific commands are blocked by driver

- Error message show up with error code "0xA008001F" when launch OptaneMemory UI

- Error "An unknown error occurred while running this application..." appears when IRST is launched from the control panel.

- Optane PCMARK HDD score is around 50K on CFL system

- Modern standby test causes PDC_WATCHDOG_TIMEOUT (14f)

- BSOD during migration after enabling Optane

- BSOD during Optane separation

- "Intel Optane Memory" tab is seen in IRST UI even when Optane device is not connected to the system

- Optane PCMV HDD cycles test score is low (around 50K) in cache full (~100%) condition

- Unexpected reboot during S3 test

- RAID0 volume state is "normal" when one of drives is disconnected.

- Intel 600P SSD has slow performance on Coffee Lake platform after storage stress test

- Bugcheck 0xA0 [HIBERSTACK_INIT_FAILED] when driver is upgraded without reboot and entered S4

- ATTO Disk Benchmark freezes on 3xHDD RAID5 with Write back cache on.

- System hung up at desktop when run S4 stress test using pwrtest.exe

- IRQL_Not_Less_Or_Equal - Bugcheck D1 observed during S3 cycling.

- System encounter "C1" BSOD when run Velocity Test Suite for the second time.(FR: 100%)

- Unable to enable Optane when 2 or more RAID data volumes exist on the system

- [AHCI mode] Bugcheck PAGE_FAULT_IN_NONPAGED_AREA (50) occurs when SATA AHCI Controller is disabled

- Incorrect Optane Volume name for HDD 2TB, SB 32GB on CFL-S

- Wrong HMB memory size returned in CLI

- Different Optane Name in UI and in disk manager.

- [RcfgSata] Could not create Intel Optane m