SoftHub

Versions:

- System BIOS: 02.06.E006

- ME Firmware: 02.01.07.328

- BMC Firmware: 01.28.R10603

- FRUSDR: 1.11

UEFI iFlash32 Installation:

1. Boot the system to EFI Shell

2. Copy IFlash32.efi, ipmi.efi and BIOS.CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear the NVRAM) Notes: It is recommended to copy full package

3. Map the respective storage device in the system with the command Shell> map -r

4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)

5. Run the IFlash32 utility at the prompt fs0:> IFlash32 [File Name] /u /ni

6. Either reboot the system and Go into BIOS setup <F2>, reset defaults <F9> and save <F10> or After the BIOS update and before rebooting, run: fS0:> Iflash32 -rd

7. Reboot the system

Backup BIOS update instructions:

1. Boot the system to EFI Shell

2. Copy IFlash32.efi, ipmi.efi and BIOS .CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear NVRAM). Notes: It is recommended to copy full package

3. Map the respective storage device in system with the command Shell> map -r

4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)

5. Run the IFlash32 utility on the prompt fs0:> IFlash32 -u [File Name] UpdateBackupBios -ni

6. It will update primary BIOS with processed capsule, and the backup BIOS update will be completed in next normal boot.

7. Reboot the system.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

About BIOS Update Utility:

The Basic Input/Output System (BIOS) is a highly important piece of software that loads the currently installed operating system and tests all hardware components – so make sure you flash it correctly.

When it comes to changing the BIOS version, the update utility searches for a compatible package in any given location or on the web and, if found, it will automatically install the desired build, if and when your approval is given.

Do take into account that failing to perform the installation could seriously damage your system, and the faulty BIOS might even render it unusable.

Therefore, if you intend to upgrade your BIOS, hit the download button, get and install the package, and run the utility to check if a newer version is available. Don’t forget to check with our website as often as possible to be up to date with the latest releases.

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

In order to apply this package, it would be best if you carefully read and understand the instructions provided by you