SoftHub

PingerPlus+ Firmware Update Instructions:

0. Before starting the PingerPlus+ firmware update procedure, ensure that the PingerPlus+ has fresh batteries installed, or is powered using the AC adapter.

1. Creat a PingerFW directory on your hard drive. Extract the PingerV1_87.ZIP file the PingerFW directory. The directory should contain two files; AutoUpdate.exe, and Update.s19.

2. Assign the PingerPlus+ a static IP address on your network. Also set the Subnet Mask and Gateway to match your network setup.

3. Connect the PingerPlus+ to your network. After establishing a connection, press the F1 "Ping" key. Press the F2 "Ping" key to ping your network's Gateway. The Ping Response screen should display COUNT: 1, GOOD: 1, BAD:0.

4. Press the F2, "Repeat" key to return to the Ping screen.

5. Press the F3, "Setup" key to select the Setup screen.

6. Press the Up Arrow key twice to display Configure "PASSWORD". 7. Press the F3, "Select" key.

8. Note the password displayed.

9. Press the F3, "Setup" key to return to the setup screen.

10. Press the Down Arrow key to display Configure "UPDATE PINGER".

11. Press the F3, "Select" key. The PingerPlus+ will display" "Finding Link ..." followed by "Update Enabled".

12. From Window's Explorer, double click on the AutoUpdate.exe file. The "Update Vesion 1.89" dialog box will be displayed.

13. Enter the PingerPlus+'s IP address and click "Update".

14. The "Password Needed" dialog box will be displayed.

15. Enter the PingerPlus's password and click OK.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

Psiber Pinger+ IP Tester Firmware Pinger+ PNG65 IP Tester Firmware Psiber Pinger+ PNG65 Firmware Pinger+