Драйвер Flanders Scientific Flanders Scientific LM-2450W (без CFE) Монитор Firmware 1.1.03-2144

НаименованиеFlanders Scientific LM-2450W (без CFE) Монитор Firmware 1.1.03-2144
Дата добавления24.09.2016
Описание

Fixes:

- Menus and some menu items rearranged for easier navigation.

- See updated user manual and/or updated online menu simulators for more details on revised menu order.

- Added ALL ON Keypad LED option. Allows easier identification of keypad buttons in vary dark operating environments.

- 1.3mag added as anamorphic desqueeze option.

LM Series Monitor Firmware Update Instructions

- Download new firmware file

- Check your monitor model and current firmware version in the monitor’s System Status menu.

If you are currently running firmware older than version 9.53-1907 proceed to step 3.

If you are currently running firmware version 9.53-1907 or later verify the UDisk option found on the monitor’s System Menu is set to ON and then skip to step 7.

- Turn the monitor OFF.

- Connect the provided Firmware Update Cable to the monitor’s GPI port.

- On the monitor’s keypad enter the following sequence: MENU, ENTER, UP, DOWN, MENU, ENTER, UP, DOWN, MENU, DOWN, POWER

- Connect the provided Firmware Update Cable to your computer’s USB port.

- The monitor will appear in Mac’s Finder or PC’s My Computer as mass storage.

- Copy / Paste or Drag and Drop the downloaded Firmware file to the monitor.

- Select Update Firmware from the monitor’s System (Color Management in older firmware versions) menu.

- Reboot the monitor when prompted after the update has succeeded.

About Monitor Firmware:

If you wish to update the monitor firmware version, know that this step can translate into improved overall performance, stability and compatibility, the inclusion of fixes for various issues encountered during the product’s lifetime, enhanced features or added support for new ones.

To perform this task, it would be best if you first read carefully and understand the installation steps necessary to successfully apply a new firmware version. If an update failure occurs, the monitor software can suffer serious malfunctions.

We recommend that any firmware upgrade be performed by a power user and only when the new version brings changes that you can make full use of. Also, after completing the update, do reboot the system to allow all changes to take effect.

In addition to that, make sure you apply the new version in a steady power environment such as the one ensured by a UPS unit, so that no power disruption affects the installation.

That being said, if you intend to update the monitor to this firmware version, click the download buttons and read the update instructions. Otherwise, check with our website as often as possible so that you don’t miss the release that your monitor needs.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

Flanders Scientific LM-2450W Firmware LM-2450W Broadcst Monitor Firmware LM-2450W Firmware Update LM-2450W Firmware Monitor

Имя файлаFW_LM-2450W_1.1.03_2144_FSI.img
Поддерживаемые ОСOS Independent
Размер8.3 МБ
Поддерживаемые устройстваНе задан
Количество скачиваний0
Вы можете скачать драйвер Flanders Scientific Flanders Scientific LM-2450W (без CFE) Монитор Firmware 1.1.03-2144 с сайта производителя нажав на кнопку "Скачать".