Популярные загрузки
» VIA HD Audio Driver 6.0.11.800 для Windows 10 64-битного
» SAMSUNG USB Driver для мобильных телефонов 1.5.9.0
» Intel WiDi / Pro WiDi Driver 6.0.66.0
» OCZ Toolbox 4.9.0.634 / ARC 100 SSD прошивки 1.01
» Samsung NP300E5C Ноутбук Easy Settings Software 1.1.1.4 для Windows 7
» Netis WF2123 USB адаптер драйвер 1030.2.0731.2015
» 9.4.1.3 Cisco 6921 IP-телефон прошивки
» A4Tech X-710K Mouse Driver / Utility 12.08V17
» VIA HD Audio Driver 6.0.11.1100 для Windows 10 64-битного
Драйвер SMART Tech SMART Технология SMART Board 800ix2 Firmware 1.4.0.0
Наименование | SMART Технология SMART Board 800ix2 Firmware 1.4.0.0 |
---|---|
Дата добавления | 24.09.2016 |
Описание |
The Extended Control Panel (ECP) used with SMART Board 800 series interactive whiteboards and the SMART UX80 projector requires firmware version 1.4.0.0 or above. This firmware version enables mapping of dual HDMI inputs with the USB interface on the ECP. To update the firmware on the SMART Board 800ix2 series interactive whiteboard systems: - Download the latest firmware version for the ECP - Move the BIN file (0057-1.4.0.0-app.bin) to the appropriate location - Browse to the SMART Firmware Updater - Run SMART Firmware Updater - The SMART firmware updater displays the model and the current version for the SC14 control panel. If the SC14 control panel has a version of 1.4.0.0 or above, no further updates are required. If the firmware version is below 1.4.0.0, you need to update your SMART ECP firmware. - Select the SC14 Control Panel,click Next and then follow the onscreen instructions. - Close the updater after the firmware update is complete. About Projector Firmware:Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes. Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps. Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable. That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector. It is highly recommended to always use the most recent driver version available Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games Try to set a system restore point before installing a device driver This will help if you installed a wrong driver Problems can arise when your hardware device is too old or not supported any longer |
Имя файла | sb800ix2firmware1_4v2.zip |
Поддерживаемые ОС | OS Independent |
Размер | 38 КБ |
Поддерживаемые устройства | Не задан |
Количество скачиваний | 9 |