SoftHub

Procedure for updating

1. After extracting the downloaded zip file, a “ROLAND” folder will be inside.

2. Save the “ROLAND” folder to the root directory of a USB memory device.

3. Turn on the power of the GW-8 and connect the USB memory device to the GW-8.

4. Press the USB IMPORT button.

5. Follow the instructions on the screen.

- Please do not modify the file or folder

- The update will take approximately 4 to 5 minutes.

Caution when performing the update (Important !)

- Never power-off your GW-8 while the update is in progress!

If a power failure or similar accident occurs during the update process, the GW-8 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact a Roland service center if this occurs.

- Before you update, we recommend that you use the “Backup” function (refer to the Owner's Manual).

- Never transmit this update data to any product other than the GW-8.This update data may destroy the data or system program of other products.

- After you perform the update, you must delete the update file from the USB-memory device.

- We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

Roland GW-8 Firmware GW-8 Workstation Firmware Roland GW-8 System Update GW-8 Firmware Roland