SoftHub

300Mbps Wireless N Router

- 300Mbps wireless speed ideal for interruption sensitive applications like HD video streaming

- Two antennas greatly increase the wireless robustness and stability

- Easy wireless security encryption at a push of WPS button

- IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC

- Compatible with IPv6 -the more recent Internet Protocol version

- TP-LINK Tether App allows quick installation and easy management using any mobile device

How to upgrade TP-Link Router:

- Log into the TP-LINK device by typing http://tplinklogin.net/ in the address bar of the web browser (such as Internet Explorer, Firefox), as shown below. The default user name and password are both admin.

- Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.

- Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.

- Click Status, verify that the router’s firmware has been upgraded.

- It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tools->Factory Defaults, Click Restore Button.

- After restoring factory default, please login to the management page with the default access address such as http://tplinklogin.net and re-enter the settings you have written down before upgrading.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

TL-WR841ND Router Firmware TL-WR841ND Wireless Router Firmware TP-Link TL-WR841ND Firmware TL-WR841ND V10