SoftHub

Fixes:

1. meet ONVIF 1.02 spec

2. add day light saving time function

3. fix activex work

a. fixed IE9 activex register issue

b. fixed video lost issue on WIN7 issue

4. fixed RTSP OVER HTTP video delay issue

5. improve Gateway¡BDNS0¡BDNS1 value set up range

6. set the default value for 2M series: agc is 8x¡Anight mode max value is 5fp.

7. fixed the CHATTING function behavior while AUDIO OFF.

8. improve the Motion_SendMailThreadLoop priority, make sure motion detection's data could upload successfully.

9. fixed the log send issue.

10. fixed the issue that PPPOE won't connect automatically while device just power on.

NOTE:

1. Do not turn the power off during the upgrade process. This will damage the unit.

2. After upgraded, please restart machine with a cold reboot for firmware reload properly.

Firmware Upgrade Procedure:

Step 1. Login camera web management page.

Step 2. Browse to "System -> Maintenance" configuration page.

Step 3. Click "Browse..." of Firmware Upgrade to find the firmware file location.

Step 4. Click "Upload Firmware" to load firmware into machine.

Step 5. When firmware upgrade finish that machine will reboot automatic.

Step 6. It's suggest reset machine to factory default for newly function properly.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

Planet ICA-HM315W Firmware ICA-HM315W IP Camera Firmware ICA-HM315W Network Camera Firmware ICA-HM315W