Драйвер Zxtech Zxtech Классический 16CH DVR прошивки

НаименованиеZxtech Классический 16CH DVR прошивки
Дата добавления24.09.2016
Описание

Upgrade Simple upgrading procedures:

1. format the U-disk ( FAT32)/ or empty the U-disk

2. Unzip the zip file 3. Put all the firmware file without folder into U-disk.

4. insert the U-disk into DVR

5. power off the DVR

6. power on the DVR & restart

7. then the DVR will Auto Detect the firmware and upgrade the DVR.

P.S: while the DVR upgrading pls don't turn off the DVR, it takes few minute.

About NVR Firmware:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

Zxtech DVR Firmware Zxtech Recorder Firmware Zxtech DVR Firmware Update Classic DVR Firmware Zxtech Firmware Update

Имя файла16channel.zip
Поддерживаемые ОСOS Independent
Размер17 МБ
Поддерживаемые устройстваНе задан
Количество скачиваний0
Вы можете скачать драйвер Zxtech Zxtech Классический 16CH DVR прошивки с сайта производителя нажав на кнопку "Скачать".