SoftHub

NOTE:

- Do not try to flash dash cams with incompatible firmware. For example, if you have a 3-button dash cam, do not use this firmware. If your existing firmware does not end in T2L-KH, do not use this firmware.

- If the current firmware in your dash cam does not end in T2L-KH, do not upgrade your firmware.

Firmware Update:

- You must use an SD-Card reader to perform this operation. Do not attempt to do this directly on the dash cam.

- Download the Update autoexec.ash file. This is a simple text file with the following contents (rm a:autoexec.ash

firmfl prog d:firmware.bin >> d:flashlog.txt

rm d:autoexec.ash

rm d:firmware.bin).

This file has the necessary commands to extract the existing firmware from the dash cam.

- Download the desired firmware.

- Rename the downloaded firmware file to firmware.bin

- Copy the autoexec.ash and firmware.bin files to SD-card using a card reader.

- Insert the card into the dash cam and turn it on.

- Wait a minute for the process to complete (the whole process takes about 10 seconds).

- Turn off the device

- Use your dash cam with the latest firmware.

WARNING!

Making changes to your firmware are performed at your own risk. we are not responsible for any damage to your dash cam as a result of these instructions.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

F500LHD Dash Cam Firmware F500LHD DashCam Firmware F500LHD Dash Camera Firmware F500LHD