SoftHub

What's new in 6.36rc39:

- chr - fixed CHR seeing its own system disk mounted as additional data disk;

- ethernet - fixed incorrect ether1 link speed after reboot on rb4xx series routers;

- firewall - fixed interface list matcher showing incorrect name for NAT rules;

- lte - added support for ZTE ZM8620;

- lte - added use-peer-dns option (will work only combined with add-default-route);

- netinstall - fixed netinstall and cd install for x86 (broken since 6.36rc27);

- pppoe - do not allow to send out bigger packets than l2mtu if mrru is provided;

- rb2011 - fixed ether6-ether10 flapping when two ports from both switch chips are in the same bridge;

- winbox - added arp-timeout setting to all ethernet like interfaces;

- winbox - added domain name support for IPv6 address list;

- winbox - do not allow to specify vlan-mode=no-tag in capsman datapath config;

- winbox - do not show mode setting for WDS interfaces;

- winbox - fixed crash when using ctrl+d;

- winbox - make local-address optional for eoipv6, 6to4, ipip, ipipv6 & grev6;

- winbox - renamed IPv6 "Raw rules" section to "Raw";

- winbox - set default sa-learning value to "yes" for CRS Ingress VLAN Translation rules;

- wireless - fixed multiple wireless packages enabled at the same time after upgrade;

- l2tp - fixed crash when rebooting or disabling l2tp while there are still active connections;

- rb3011 - fixed usb storage mounting;

- webfig - reduced refresh time for wireless registration table to 1 second;

- clock - fixed time keeping for SXT ac, 911L, cAP, mAP lite, wAP;

- ipsec - show remote peer address in error messages when possible;

- lte - display message in lte,error log if no response received;

- lte - display message in lte,error log when PIN is required;

- modem - added support for Alcatel OneTouch X600;

- upnp - fixed firewall rules not being dynamic;

- email - fixed send from winbox;

- log - make logging process less aggressive on startup;

- wap-ac - fixed performance problems with 2.4GHz wireless (additional reboot after upgrade required);

- wireless - wireless-fp is discontinued, it needs to be uninstalled/disabled before upgrade;

- address - allow multiple equal ip addresses to be added if neither or only one is enabled;

- address-list - make "dynamic=yes" as read-only option;

- arm - added Dude server support;

- arm - fixed kernel failure on low memory;

- arp - added arp-timeout option per interface;

- bonding - fixed 802.3ad load balancing mode over tunnels ;

- bonding - fixed bonding primary slave assignment for ovpn interfaces after startup;

- bonding - fixed crash on RoMON traffic transmit;

- bonding - implemented l2mtu value == smallest slave interfaces l2mtu;

- capsman - fixed crash when running over ovpn;

- certificate - added automatic scep renewal delay after startup to avoid all requests accessing CA at the same time;

- certificate - cancel pending renew when certificate becomes valid after date change;

- certificate - display issuer and subject on check failure;

- certificate - do not exit after card-verify;

- certificate - force scep renewal on system clock updates;

- chr - fixed stalling services (introduced in 6.36rc6);

- clock - save current time to configuration once per day even if there are no time zone adjustments pending;

- cloud - fixed export order;

- console - fixed get false function;

- console - show message time in echo log messages;

- defconf - changed channel extension to 20/40/80mhz for all ac boards;

- dhcp-pd - correct server listing for commands;

- dhcp-server - fixed radius framed route addition after reboot on client renew;

- dhcpv6 client - fixed ia lifetime validation when it is set by dhcpv6 client;

-