SoftHub

Changes: 

 - Added RTC support for the WL-HDD/WL-700g boards

- Fixed a bug causing lockups during reboot

- SNMP: uptime values no longer depends on the system time

- UPnP: it's now possible to select interface for which interface address reported back to clients (IP Config - Misc), port-forwards are working just like other virtual servers

- UPnP: additionally protected by built-in firewall in case when multicast forwards enabled

- IPTV: added udpxy (check IP Config - Miscellaneous: IPTV UDP Multicast to HTTP Proxy Port) to enable-disable it

- Added Get IP automatically option to the WAN & LAN page

- DHCP: added support for some broken DHCP servers (e.g. Golden Telecom)

- Manual DNS server entries are no longer added to routing table

- Fixed Redirects in the web-iface (it should no longer redirect to internal address);

- Enabled Idle Disconnect functionality for PPPoE/PPTP. It's recomended to turn this feature off by typing zero in this field.

- L2TP speed increase (up to 2.5 times compared to previous versions) and correct tunnel termination

- PPTP sync option is now correctly handled and enabled by default, improved overall stability, cleared up logs;

- Updated QuickSetup to recent PPPoE, PPTP and L2TP changes

- Added fine grained WPA control on the Wireless page: added separate WPA Enterprise, WPA2 Enterprise, WPA Personal, WPA2 Personal and WPA-Auto-Personal (which is wpa-psk + wpa2-psk for TKIP+AES, wpa-psk for TKIP and wpa2-psk for AES).

- Added Regulatory Mode field (802.11d/802.11h/off) to the Wireless - Advanced page. This should fix some problems with Intel WiFi cards (select 802.11d mode).

- Virtual Servers has now separate default action in the WAN to LAN firewall.

- Added Host Name field to the Manual DHCP MAC list.

- Added Comment field to Wireless - Access list.

- FTP: switched to vsftpd, reworked web-iface.

- Samba: extended web-iface, new share modes - all partitions, manual share list.

- Samba: Windows Vista support, W2K3SP1 compatibility

- Added utf8 as default encoding of the hard/flash drive (enabled by default).

- NFS: fixed some /etc/exports problems

- Kernel modules are now stored in single directory

- Added ftdi_sio usb to serial converter module

- Some other modules are now available as separate download (modules-1.9.2.7-9.tgz), includes HID, input, Bluetooth. Unpack them to /opt

- Added modprobe, which is looking for /opt/lib/modules/... by default.

- USB updates

- VLAN support fixes, updated robocfg

- dropbear 0.50 (credits to lly), enabled inetd support

- busybox_httpd fixes: new cgi environment vars (HTTP_HOST, CGI_*)

- Changed a way how automount works: everything is mounted to /tmp/mnt now, while /tmp/harddisk is just a symbolic link to first partition

- Samba/FTP/NFS relative paths are against /tmp/harddisk

- Added /usr/local/sbin/pre-mount to be called before automount (suitable to manual mounts, disk checks, etc).

- Added Enable USB Storage selection to the System Setup - Services page to enable usb storage modules to load automatically

- Added filesystem type autodetection to automount partition

Important changes:

To reset username/password you've to reset to defaults using a RESET/RESTORE button!

- Port numbers used for RAW printing are changed: use 9100 for USB and 9101 for LPT

- Root fs is now ext3

- All scripts should now have

#!/bin/sh

line, otherwise they will not work

- post & pre scripts are now stored in the /usr/local/sbin directory; there is no /usr/local/init anymore

- post-firewall script should be adjusted, be careful when adding rules with -A - this will no longer work correctly, due to unconditional rule. Check the iptables -L -v output

- Client mode is not supported by the WL-500bv2 units

WARNING:

DON'T TRY CUSTOM FIRMWARES UNLESS YOU KNOW WHAT YOU ARE DOING, YOU COULD DESTROY YOUR UNIT BY DOING THIS! I'M NOT R