SoftHub

Corrections:

- Fixed a problem where the oscilloscope would go into an acquiring loop under certain circumstances

The firmware update procedure does not modify or delete any user data (setups, waveforms, screen captures, calibration constants, etc.) stored on the MicroSD card.

1. Download the firmware file.

2. Select your oscilloscope series and model number.

3. Enter your registration login information, or create a new account.

4. Click the download link, and choose to Save the installer to a USB storage device.

5. Insert the USB device into one of the ports on the front of the oscilloscope.

6. Go to Utilities > Utilities Setup and choose Update Firmware.

7. Browse to the installer file in the USB Disk folder, then click Upgrade.

8. When installation is complete, choose Reboot Now.

CAUTION.

The installation may take several minutes, depending on the length of time since your last upgrade. Do not power down the oscilloscope at any

point during the installation process.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

WaveSurfer 3000 Oscilloscope Firmware Teledyne LeCroy WaveSurfer 3000 Firmware WaveSurfer Oscilloscope Firmware WaveSurfer 3000 Firmware Oscilloscope Teledyne LeCroy