SoftHub

Changelog:

- THM files removed

- Mode 2 image rotation bug fixed

- Low battery warning sound added (set in app/pc program)

- WiFi mode turned on after formatting card bug fixed

MUST READ:

IF YOU HAVE THE 4TH JULY FIRMWARE INSTALLED USE FIRMWARE.BIN AS IT SHOULD WORK FINE. If you have anything older please upgrade to 4th July firmware first then use .bin or just use the 15th July ELF file.

After the camera has updated by .bin/.elf press reset. Turn the camera on and FORMAT THE CARD INSIDE THE CAMERA USING THE M BUTTON (hold M down for 5 seconds, then whilst holding M down quickly press the power button, then wait another 1 second and release the M button). Then use as normal. The reason we are STRONGLY recommending you format the card inside the camera is just to the new file structure.

To install firmware please follow the instructions below:

- Download firmware

- Connect your JooVuu X or microSD card to the computer

- Place the firmware.bin file on the microSD card/JooVuu X. NOT in any folders.

- Insert the card back into the JooVuu X or simply disconnect the JooVuu X from the computer.

- Plug the JooVuu X into a wall charger USB plug or your car charger with the microSD card inserted.

- VOILA the JooVuu X will update. It takes between 1-2 minutes. Once updated it will switch off – THIS IS NORMAL. Please just press the RESET BUTTON THEN power button to turn it back on.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

JooVuu Car Camera Firmware JooVuu Dash Cam Firmware JooVuu Camera Firmware Update