Драйвер Kramer Kramer VP-747 Презентация скалер-коммутатор Firmware 1.07

НаименованиеKramer VP-747 Презентация скалер-коммутатор Firmware 1.07
Дата добавления20.07.2016
Описание

VP-747 Firmware Upgrade Procedure

1. Acquire xxx.brit file with the required version of firmware.

2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).

3. Plug the device with the firmware file into one of the USB connectors on the rear panel of the VP-747 and switch on the scaler.

4. Wait until the scaler boots up and verify that the Preview and the Program outputs are set to different inputs. Not necessary to have real signals on the selected inputs.

5. Use OSD menu to navigate to

Utility>Misc Setting>Firmware Download

6. Press ENTER button. If the OSD opens list of files – skip the following step and continue with the step 8 below.

7. If the OSD doesn’t open list of files – press Take button to swap the Preview and the Program inputs. Repeat the steps 5 and 6 above.

8. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.

9. Confirm the upgrade and wait until progress indicator gets to 100%.

10. Remove the device with the firmware file from USB connector and restart the scaler by recycling the power.

11. Plug the device with the same firmware file into second USB connector on the rear panel of the VP-747 and repeat the above procedure.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

Kramer VP-747 Firmware VP-747 Presentation Switcher Firmware VP-747 Presentation Scaler Firmware VP-747 Firmware Kramer

Имя файлаvp-747_scaler_firmware_upgrade_v.1.07.zip
Поддерживаемые ОСOS Independent
Размер1.1 МБ
Поддерживаемые устройстваНе задан
Количество скачиваний0
Вы можете скачать драйвер Kramer Kramer VP-747 Презентация скалер-коммутатор Firmware 1.07 с сайта производителя нажав на кнопку "Скачать".