SoftHub

Release Version

New Features

- 2nd stream record – Dual record

Allow system to operate dual record with both streams.

- H.265 Support

Remote client only with supported cameras

- Support Hungarian

- Dual Monitor

User can enjoy dual monitors with different layout on local client.

- Local IPC image preview

Allow user to manage camera easily.

- Local IPC Motion

New Motion detection added.

- Local IPC firmware upgrade, IPC reboot and reset to default

- UPnP Support

User can mass upgrade SNVRs/ IPCs in one time by IPInstaller in remote PC.

Bugs Fixed

1. Emergency record will start when stop at first time login and switch to playback.

2. WAN file backup timeout when transferring large files is fixed.

3. WAN playback performance is enhanced by adding new NUPP command “NEXTGOP”.

4. Local joystick support is merged back.

5. Local audio support in 2nd stream.

6. Fix local display “splash” issue that happens sometimes.

7. Fix local display showing FPS without decoded issue that happens sometimes.

8. Fix local backup POS sometimes can’t show Chinese.

9. Fix remote playback can’t use “select folder” to show POS.

10. Local audio will disappear when monitor “unplug and plug” in solo is fixed.

11. Drag and Drop will sometime malfunction during high CPU usage is fixed.

12. Fix local backup issue, record operation sequence.

Known Issues

1. User needs to use client pack 6.1.705.5 for new features to avoid failure.

2. To change camera order in liveview, user needs to click grid more than 2 seconds until mouse cursor change icon for drag and drop.

About NVR Firmware:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer

NUUO NS-8065 Firmware NS-8065 NVR Firmware