SoftHub

Changes:

- Adds Odin II functionality – Groups, Channels and Digital ID to Mitros+ flash.

Before you begin:

- Unzip the rmware archive and save to your computer.

- The archive will contain three les, download-fds.exe (the upgrade software), an .fds le (the latest rmware), and instructions and notes on the upgrade.

Checking the Firmware Version Number:

- Open the folder containing the upgrade.

- Double click on download.fds.exe. This will start the upgrade software.

- Connect the USB cable included with the Phottix Odin to the computer.

- Connect the other end of the USB cable to the Odin TCU or Receiver.

- Press the Power Button on the Odin TCU until the unit turns on (or slide the power switch on the Odin Receiver to the ON position).

- The software will recognize the Odin TCU or Receiver and the previously greyed out boxes of Download and Version will be active.

- Click the “Version” icon.

- The current version of the connected TCU or Receiver will be shown in the bar at the bottom of the software window.

- Upon completion disconnect the Odin TCU or Receiver from the USB cable.

Upgrading the Phottix Odin TCU (transmitter):

- Open the folder containing the upgrade.

- Double click on download.fds.exe. This will start the upgrade software.

- Connect the USB cable included with the Phottix Odin to the computer.

- Connect the other end of the USB cable to the Odin TCU.

- Press the Power Button on the Odin TCU until the unit turns on.

- The software will recognize the Odin TCU and the previously greyed out boxes of Download and Version will be active.

- Click the “Download” icon. In the Window le selection dialogue box double-click the software upgrade from the same folder as the software. The upgrade will have the extension XXXX.fds.

- The upgrade will start. You can track the status of the upgrade with the progress bar.

- Upon completion disconnect the Odin TCU from the USB cable.

Upgrading the Phottix Odin Receiver:

- Upgrading the rmware in Phottix Odin Receivers is the same procedure as upgrading the TCU.

- Open the folder containing the upgrade.

- Double click on download.fds.exe. This will start the upgrade software.

- Connect the USB cable included with the Phottix Odin to the computer.

- Connect the other end of the USB cable to the Odin Receiver.

- Move to the power switch on the Odin Receiver to the ON position.

- The software will recognize the Odin Receiver and the previously greyed out boxes of Download and Version will be active.

- Click the “Download” icon. In the Window le selection dialogue box double-click the software upgrade from the same folder as the software. The upgrade will have the extension XXXX.fds.

- The upgrade will start. You can track the status of the upgrade with the progress bar.

- Upon completion disconnect the Odin Receiver from the USB cable.

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you’re properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.

It is highly recommended to always use the most recent driver ve