SoftHub

New Features:

- Support ONVIF Profile S

Changed features:

- Support full-duplex of two-way audio
- Video title supports Chinese language or full-type characters

Bugs fixed:

- Fix that fails to use snapshot / Full screen button when setting Audio only and Video codec is JPEG
- Fix that fails to play the file which its file name prefix contains symbols that download from local storage page
- Fix that click talk button in Home page and then go to other stream, volume button status become gray
- Fix that when open two IE and click both talk buttons, one of the volume button will change to the talk button
- Fix that CSR certification fails on Symantec
- Fix that local storage page brings the empty SD card information after format SD card
- Fix wrong French language
- Fix that if users set up NTP server and sync time fail, system will set up the default NTP server
- Fix that there are probably cause exposure page open fail when switch 50/60Hz

Installation steps:

1. Download the latest firmware/
2. Open the Network Camera's main page.
3. Click on System > Maintenance.
4. Click Browse… and specify the firmware file.
3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade completes.

Note:

- If the upgrade is successful, you will see “Reboot system now!! This connection will close”. After that, re-access the Network Camera.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.