SoftHub

Multi-Megapixel Hybrid IP Camera

Full featured Multi-Megapixel IP Video doesn't have to be expensive and it doesn't have to be an IP-only solution. StarDot's new NetCam SC gives you the best of both worlds in a compact and easy to configure package. Although the SC5 boasts a whopping 5 megapixel image sensor, it can be run at lower resolutions, including HD (1080P & 720P), portrait and widescreen modes.

WARNING:

Firmware on this page is only compatible with camera IDs (MAC address) that begin with:
00:30:F4:F2

If this firmware is used with any other StarDot device, it can leave the device inoperable.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.