SoftHub

New features:

- Added PING Tool on MyPBX web user interface.
- Added SNMP feature.
- Added support for CDMA Module.
- Added Hotline feature for FXS extensions.
- Added Czech System Prompt.
- Added Directed Call Parking feature.
- Added support for iLBC codec.

Optimization:

- VPN settings are configurable on MyPBX web user interface.
- Optimized Follow Me settings.
- Users could choose to store call logs, one-touch recording files and voicemail messages to USB device.
- DID number would be found on SIP Diversion field if Diversion ID is enabled via “PBX → Advanced Settings → SIP Settings → Advanced Settings ”.
- If DOD number is set on MyPBX, when calling out through MyPBX, the DOD number could be recognized as Remote Party ID in SIP INVITE packet.

Bug Fixes:

- Fixed the issue that the web interface would show the error “502 Bad Gateway” once you adjust the sequence of the firewall rules.
- Fixed the issue that follow me prompt would not take effect when you selected the Persian as system prompt.
- Fixed the issue that “Addon Settings” of user account; monitor account and hotel account would appear in the User Permissions Settings menu for MyPBX Standard and SOHO.
- Fixed the issue that Password Settings menu would still exist even if User Permission Setting was already set to allow password change.
- Fixed the issue that wrong value of Line in BLF type on Auto Provisioning page for Yealink VP530.
- Fixed the issue of batch import for PIN settings / Speed Dial / LDAP.

Installation steps:

1. Download firmware file.
2. Create tftp Server (For example, tftpd on Windows)
i) Download and install tftpd32 software on computer.
ii) Configure tftpd32. On option “Current Directory”, click “Browse” button, choose the firmware file upgraded patch, such as C:\Image\15.19.0.43.bin
Note:
The firmware file you downloaded from Yeastar website should be a compressed RAR or ZIP file. You need to decompress the RAR file, and choose the “Current Directory” to the directory where the BIN file saved.
3. Logon the device’s Web page and go to System / System Preferences / Firmware Update, choose “TFTP Server”.
i) TFTP Server: Fill in IP address of tftpd32 server(your PC’s IP address), such as 192.168.5.27.
ii) File Name: Enter the name of firmware update, such as 15.19.0.43.bin
Note: In this field, you need to fill in the BIN file name.
iii) Click “Start” to upgrade.

NOTE:

- We strongly recommend you to back up the configurations and all the files before you upgrade.
- Backup files from higher firmware version cannot be restored to the device with lower firmware version.
- You need to RESET the device to make it work properly if you downgrade the firmware.
- Please clear the browser’s cache after upgrade.

About VoIP Phone Firmware:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.