Драйвер TP-LINK TP-Link Archer D9 v1 Router Firmware 160303

НаименованиеTP-Link Archer D9 v1 Router Firmware 160303
Дата добавления18.03.2016
Описание

Modifications and Bug Fixes:

- Fix the Bug that the Wi-Fi LED will not light up after upgrade the firmware 160115

Notes

- Old firmware’s configuration file can be imported into this new firmware.
- Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading.

How to upgrade:

Step 1: Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser. The User Name and Password are both admin unless you have changed it before.
Step 2: Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
Step 3: Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
Step 4: Click Status, verify that the router’s firmware has been upgraded.
Step 5: It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tool->Factory Default, Click Restore Button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

Имя файлаArcher_D9(EU)_V1_160303.zip
Поддерживаемые ОСOS Independent
Размер10.4 МБ
Поддерживаемые устройстваНе задан
Количество скачиваний16
Вы можете скачать драйвер TP-LINK TP-Link Archer D9 v1 Router Firmware 160303 с сайта производителя нажав на кнопку "Скачать".