SoftHub

Fixes:

- Sharpness control now functioning properly
- RGB color controls now save when rebooting
- Changing presets no longer causes menu to open
- False color accuracy improved 
- More accurate auto-scaling
- Preset functionality improved
- Other minor bug fixes 

Installation steps:

1. Insert FAT or FAT32 formatted USB drive into your PC or Mac.
2. Remove/Delete any existing .bin file.
3. Download the desired Firmware version from the list above.
4. Copy the *.bin file to the USB drive. The file must NOT be in a folder.
5. Safely eject the USB drive from the PC/Mac.
6. Power Off the AC7.
7. Insert the USB drive into the USB adapter cable that was included with your AC7.
8. Plug the USB cable into the AC7 Mini-USB port.
9. While pressing down on the AC7 scroll wheel, Power ON the AC7.
10. Once white text appears on the black screen, you may stop pressing the thumb wheel. If the AC7 gets stuck during the "Verification" process for more than 4 minutes, the update has successfully completed and you may proceed to the next step.
11. When prompted, switch the AC7 OFF, remove the USB cable, and then Power On the AC7.
12. Reset the monitor to factory defaults: Select MENU > SYSTEM > FACTORY RESET

Important notice:

- Be careful NOT to lose power during the update process. We recommend you use the AC adapter or a fully charged battery. If the AC7 powers OFF during the software update BEFORE the VERIFY begins, you will have a blank monitor. You should be able to restore everything by successfully completing the Firmware Update. However, should your monitor need to be sent back for repair, associated shipping and repair costs are not covered by the AC7's warranty.
- It is recommended that you use a drive that is 2GB or less and formatted FAT or FAT32.
- The drive should ONLY contain only ONE *.bin file. ALWAYS delete the old *.bin from the USB drive before making the next update. You may have other files on the drive, but only one *.bin file.
- To View Installed Firmware Version: MENU > MISC > VERSION

About Field Monitor Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.