SoftHub

New features:

- Firmware 5.75 extends the ACAP SDK which gives new possibilities to develop ACAP’s. It is also possible to enable multiple ACAP applications to run simultaneously.
- Axis is now extending SNMP with AXIS Video MIB (Management Information Base).The Video MIB enables notification of a number of possible disruptions in Axis products such as fan failure, temperature limits, storage disruptions, tampering, video/audio connectors disconnect, etc via SNMP traps. Available traps depend on the Axis product.
- Axis firmware now has the ability to auto-format an SD card to a specified file system upon insertion. This will allow an easy installation of a new SD card that will be formatted automatically to a preselected file system, mounted and recording will be resumed.
- Edge Storage recording makes it possible to indicate, e.g. on the Live view, that an edge storage recording is ongoing. This allows the operator to be notified if a recording of scene is ongoing or not.
- The Live View page is updated with responsive design and scales with different screen resolutions and browser window sizes. This will allow the user to always see the complete page without the need to scroll.
- The Export Video Clip capability enables the export of recordings directly from the camera to a PC or a smartphone. Select the wanted portion of an Edge Storage recording from your camera and export them as playable video file to a client. The exported recording will be one playable matroska file.
- SSH command line interface to the products that may be used for specific support and maintenance activities was introduced in 5.50. SSH is now the only supported protocol to establish a connection and telnet is not supported anymore. SSH is not enabled by default but can be activated by an API.
- Secure FTP (SFTP) is now supported allowing a more secure file transfer method.
- Edge Storage robustness is improved with features to detect and repair faults due to unexpected loss of storage media.
- Storage limit offers a possibility to control how much storage space may be used for recordings. This is available via VAPIX.
- Axis network cameras now support NAS drives over 2TB.
- Storage manager collects information about SD card usage.

Corrections:

- Ongoing recordings will be accessible and possible to download from the web interface after a restart initiated in the web interface.
- Select "Use Temporary Mode" if temporary files during ftp upload is wanted.
- Privacy masks marking will be aligned to the marking regardless of capture mode and selected resolution when saving the settings.
- Improvements in setup of new video streaming towards network storage after longer connection disruptions.
- It is possible to use "Play from start" offset on the Play Recording page for ongoing recordings.
- All emails will include a final boundary when an Action rule is sending out multiple emails for one trigger.
- It's now possible to have recurrence in seconds.
- Startup time is not affected if a network share is mounted.
- Default resolution for quality stream profile will now use sensor size.
- Status led will now behave as described in user manual when upgrading the camera. 

UPGRADE INSTRUCTIONS

The firmware can be upgraded using AXIS Camera Management, HTTP or FTP.

AXIS Camera Management:

1. Download and install AXIS Camera Management on your computer.
2. Download the upgrade file to a directory that is accessible from your local computer if the upgrade file is not to be downloaded via Internet connection from the Axis Support pages.
3. Run AXIS Camera Management. All the Axis devices found on the local subnet (or on subnets with routers that support multicasting) are shown 
in the list.
4. Select the devices that you want to upgrade with new firmware (you can
even select different models) and click the Upgrade icon.
Note: A dialog will open if some of the devices can not be configured, e.g. if the devices are not accessible. 
5. The Upgrade Firmware dialog shows a list of camera models.
6. Click to locate the new firmware versions stored on your hard drive, select among already downloaded files or select to download official firmware file from Axis Support Pages (marked with Download). This needs to be done for each Axis network camera or video encoder model. 
7. Click OK to start upgrading the devices.

HTTP:

1. Download the upgrade file to a directory that is accessible from your
local computer.
2. Go to the product's start page (e.g. http://192.168.0.90).
3. Click the Setup link and log in as "root" (or any other user with Administrator privileges). You must