SoftHub

Fixes:

- Updates the firmware to version LB3i for the Intel SSD 520 Series models.
- Updates the firmware to version 4PC10365 for the Intel SSD 320 Series models.
- Updates the firmware to versions 2CV102M3 and 2CV102M6 for the Intel X25-M and X18-M Mainstream SSD Series models.
- Provides the ability to update the firmware while the Microsoft Windows operating system is running.
- Provides the ability to update the firmware when the full-disk encryption is installed.
- Updates firmware with Windows Operating Systems running.
- Updates firmware when full disk encryption is installed.
- Provides the bootable CD-ROM ISO images to update firmware on local systems and on non-Windows operating systems.

For the Intel SSD 520 Series models:
- Provides improved PHY margin setting to prevented losing the link to the SATA drive.
- Provides the response time when the system resumes from sleep (S3) mode.

For the Intel X25-M and X18-M Mainstream SSD Series models:
- Fixes an issue where the system does not recognize the drive.
- Fixes an issue where the system displays the "Imminent Drive Failure" message during the BIOS Power On Self Test (POST).
- Fixes an issue where the notebook unexpectedly restarts while running the Microsoft Windows operating system.
- Fixes an intermittent issue where the system does not restart (reboot) and displays the "Boot device not found" error message after resuming from hibernation mode.

For the Intel SSD 320 Series models:
- Fixes an intermittent issue where the system does not restart (reboot) and displays the "Boot device not found" error message after resuming from hibernation mode.
- Fixes an issue where data is not completely saved to the hard drive and is
lost when the system is suddenly powered off. 

Devices supported:

- 80GB 1.8 Intel X18-M SSD Drive
- 80GB Intel X25-M SSD Drive
- 160GB 1.8 Intel X18-M SSD Drive
- 160GB Intel X25-M SSD Drive
- 80GB Intel SSD 320 Series Drive
- 120GB Intel SSD 320 Series Drive
- 160GB Intel SSD 320 Series Drive
- 300GB Intel SSD 320 Series Drive
- 180GB Intel SSD 520 Series Drive
- 240GB Intel SSD 520 Series Drive

Installation steps (for exe / zip):

1. Save the driver files to your computer.
2. Run the executable or extract the installation files to a location on your disk.
3. Follow the steps displayed by the setup wizard.
4. After installation, restart the computer.

Important notes:

- Before installation, save all your work and close all the running programs, as the installation may interfere with other apps;
- If the setup wizard requests Administrative rights, make sure to run the setup as Administrator;
- Pay attention to all installation instructions to make sure the driver is installed correctly;

About SSD Frimware:

Changing the solid-state drive (SSD) firmware version can bring about a wide variety of changes such as stability improvements for different sleep states, power consumption enhancements, increased read/write speeds, optimized compatibility with various systems, and many others.

However, performing this step is very risky because it can damage the SSD’s software in the event of an update failure. Therefore, make sure you consider changing the firmware only when and if the new version includes changes that you can make use of.

As for the installation method, given the huge number of SSD manufacturers and the wide variety of solid-state drives, it’s recommended that you carefully read and understand the update guide, and initiate the upgrade only when you have completely familiarized yourself with the steps.

In addition to that, most SSD manufacturers also require additional software that will help you apply a new firmware using a specific method – so make sure you have everything you need for a complete and successful upgrade.

Another aspect you should keep in mind is that this task must be performed in a steady power environment, such as the one provided by a UPS unit. Don’t forget to reboot the system so that the newly made changes can take effect.

That being said, if this release includes the changes you need / desire, click the download button and get the firmware file. If not, check with our website constantly in order to find out first when a suitable update becomes available.