SoftHub

PNY SSD Firmware Update Procedure

- Prior to launching the PNY Field Firmware Update tool, it is recommend to perform a backup of all your data to ensure no data is lost during the firmware update process
- For the update to work properly you must be running Windows 8,Windows 7, Vista SP2, or XP SP3 in AHCI (Advanced Host Controller Interface) mode.
- Do not unplug power at any time during the firmware update. Power needs to be constant during the update, either from AC power or battery power.
- AMD users must use the Microsoft AHCI driver for the update procedure to complete successfully.
- Use only native SATA ports to perform the upgrade; do NOT use third party controllers.
- Notebook users, it is recommended to use AC power to prevent any power loss during firmware upgrade. The update should take several minutes.