SoftHub

New features:

 
- Edge storage recording robustness is improved with an automatic database repair feature.
- SNMP MIB r/w OID values are saved after reboot.
- Improved start-up time.
- Removed predefined stream profiles: Quality, HDTV, Balanced, Bandwidth, Mobile.
- Upgrade OpenSSL to version 1.0.2d. This version also provides support for TLS 1.2.
- The API Event Handling 1.10 is being removed from this release. If events have been previously added with this api, they need to be converted using the convert button in the Action Rules web page _before_ upgrading to 6.10. Failing to do this will result in all event configurations being lost.
- Max exposure time parameter is now available in the Camera Settings. It can be used in LPR installations when setting Max exposure time shorter than default Max shutter time.

Corrections:

- It is now possible to a select starting point when playing back a recording while using multicast and H.264.
- When DST is enabled, export recordings can now be done via web interface.
- Reduced audio noise levels from internal microphone.
- PullMessages now follow the ONVIF specification 9.1.2.
- Rule is now triggered on start event/signal raise and not on condition.
- Users with admin permissions can edit ACAP configuration settings.
- Rectified pulsing of the image in very bright environment.
- Improved Privacy mask alignment.
- Manual triggers for all enabled View Areas are shown.
- Improved synchronization between sound and video when having low fps and long GOV length.
- Fixed issue with image switching between black/white and color mode.
- Corrected H264 payloader behaviour to now insert PPS/SPS frames before every I-frame. This will improve behaviour, especially with Genetec clients that uses multicast.

UPGRADE INSTRUCTIONS
The firmware can be upgraded using AXIS Camera Management, HTTP or FTP.

AXIS Camera Management:

1. Download and install AXIS Camera Management on your computer.
2. Download the upgrade file to a directory that is accessible from your local computer if the upgrade file is not to be downloaded via Internet connection from the Axis Support pages.
3. Run AXIS Camera Management. All the Axis devices found on the local subnet (or on subnets with routers that support multicasting) are shown 
in the list.
4. Select the devices that you want to upgrade with new firmware (you can
even select different models) and click the Upgrade icon.
Note: A dialog will open if some of the devices can not be configured, e.g. if the devices are not accessible. 
5. The Upgrade Firmware dialog shows a list of camera models.
6. Click to locate the new firmware versions stored on your hard drive, select among already downloaded files or select to download official firmware file from Axis Support Pages (marked with Download). This needs to be done for each Axis network camera or video encoder model. 
7. Click OK to start upgrading the devices.

HTTP:

1. Download the upgrade file to a directory that is accessible from your
local computer.
2. Go to the product's start page (e.g. http://192.168.0.90).
3. Click the Setup link and log in as "root" (or any other user with Administrator privileges). You must be logged in as an Administrator to 
upgrade the unit.
4. Click System Options in the menu to the left.
5. Click Maintenance.
6. Click the Browse button in the Upgrade Server section.
7. Select the upgrade file you downloaded (and maybe decompressed) from our site. This file is typically named after the product and Firmware version.
8. Click the Open button.
9. Click the Upgrade button in the Upgrade Server section.
10. Wait for the flash load to complete, which may take 1-10 minutes. The upgrade procedure is in four steps:
- Step 1, Shut down: Running applications are shut down and active connections are terminated.
- Step 2, Uploading firmware: The old firmware will be erased and the new firmware will be saved. During this step, the Power LED will blink green/amber. After a while the progress of the upgrade will be displayed in the Web browser.
- Step 3, Reboot: The system restarts automatically.
- Step 4, Reconfiguration:The new firmware settings are configured to match the previous settings.The Status LED will be amber during this step.
11. After the upgrade has completed, the unit will automatically initiate the
system, during which the Status LED blinks amber. When initiation is complete and the system is ready for use, the Status LED will be green.

FTP:

1. You must be at the command promp