Драйвер Ricoh Ricoh CX4 Прошивка для цифровой фотокамеры 1.05 для Windows 7

НаименованиеRicoh CX4 Прошивка для цифровой фотокамеры 1.05 для Windows 7
Дата добавления16.03.2016
Описание

Fixes:

Modified the following phenomenon.
1. In the Night Landscape Multi-shot, when pressing the shutter release button half way, the camera shake warning symbol will not be displayed in the screen.

Firmware installation steps:

1. Copy the firmware to the SD memory card.
2. Remove the SD memory card from the PC card reader/card slot and insert it into the camera.
3. With the camera turned off, while pressing the ADJ./OK button upwards side, press and hold the Playback button down for 2 to 3 seconds.
 - A message confirming the firmware update will appear on the picture display.  
4. Press the ADJ./OK button toward the F side, select [YES], and press the ADJ./OK button.
 -  The firmware update will start, and the message shown below will display on the picture display.The firmware update should take about 30 seconds to complete.
 - If a message saying, [Incorrect rewriting file] appears on the picture display and the power to the camera turns off automatically, check the model of the camera, and use the correct firmware to update the firmware again.
 - If the message, [No rewriting file] is displayed, then the firmware was not copied to the SD memory card correctly.Confirm that the file was copied correctly.
5. After updating the firmware is completed, the power to the camera will once turn off automatically, and then the power will turn on in playback mode.
6. Turn off the power to the camera.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

Имя файлаcx4-105.zip
Поддерживаемые ОСWindows 7/7 64 бит
Размер1.8 МБ
Поддерживаемые устройстваНе задан
Количество скачиваний0
Вы можете скачать драйвер Ricoh Ricoh CX4 Прошивка для цифровой фотокамеры 1.05 для Windows 7 с сайта производителя нажав на кнопку "Скачать".