SoftHub

Versions:

- BIOS: 02.06.0002
- ME: 02.01.07.328
- BMC: 01.25.9398
- FRUSDR: 1.13

BIOS R02.06.0002 Changes:

- Fixed:The EFI script “Variable_reclaim.nsh” cannot complete successful and the BIOS Error Manager screen will show "A0A8" memory update failure error.
- Fixed:POST screen and BIOS setup screen will shows different BIOS version under recovery mode.
- Fixed: Victor Sokolov - Removable RAID Controller .
- Fixed: Change Boot Order with SYSCFG in S2600CO2
- Fixed: "Melock" fix.
- Fixed: (X) BIOS 2.04 help screen text typos.
- Fixed: Romley Security issue.
- Fixed: The link speed of RS3WC080 storage card only report to Gen2 on BIOS R02.04.0002 with SNB CPU.
- Fixed: UEFI Optimized Boot acknowledges F2 Setup to start, but boots Windows instead.

ME 2.01.07.328 Changes:

- Fixed: Platform is not able to power on properly after being shut down by NM Policy
- Fixed: Global platform power consumption reported by NM Statistics in S5 is incorrect
- Fixed: OOB (out-of-band) stress test by issuing the wrong username may cause connection to be unavailable
- Fixed: Shutdown action can be interrupted by cold reset when volatile NM policy is in use

BMC 01.25.9398 Changes:

- BMC change to ensure the system remains off after an over current event until the system has been AC power cycled
- Add a new support for only TLS1.2 protocol(both for stunnel and openssl).
- Disable stunnel for ihc
- The www sections location is changed from 00c00000 to 00c20000.
- Update openssl to 1.0.2d.

This download is valid for the products listed below:

- Intel Server Board S2600JF
- Intel Server Board S2600JFQ
- Intel Server System H2312JFKR
- Intel Server System H2312JFQKR
- Intel Server System H2312JFJR
- Intel Server System H2312JFQJR
- Intel Server System H2216JFKR
- Intel Server System H2216JFQKR
- Intel Server System H2216JFJR
- Intel Server System H2216JFQJR
- Intel Server Board S2600JFF
- Intel Server System H2312JFFJR
- Intel Server System H2216JFFJR
- Intel Server System H2312JFFKR
- Intel Server System H2216JFFKR

System Firmware Update Package Usage instructions:

This package can be updated using one of the following methods:
- The embedded UEFI shell
- Intel Deployment Assistant
- Windows or Linux operating system using Intel One-boot Flash Update (OFU) V11.0 Build 15 or later)
- Windows Preboot Execution Environment (WinPE)

To update from the embedded EFI Shell
- Unzip package and copy all files to root folder in USB flash drive
- Insert USB flash drive to server USB port
- Reboot server, system will start BIOS/BMC/FRUSDR update automatically

If the unzipped package is not under the root folder of USB flash drive:
- Reboot server to EFI shell manually
- Run command "map -r" in EFI shell to find the mount point of the USB flash drive
- The USB flash drive may mount to fs0: or fs1: or other.
- Run command "fs0:" or other to change folder to USB flash drive,
- Change folder to the folder storing the firmware package
- Run command "startup.nsh" to start firmware update process

Alternate Update Procedure: Individual Firmware Update Procedure

If you want to update firmware components individually, like BMC/BIOS/ME/FRUSDR, do NOT run the "STARTUP.NSH" file described in the Standard Update Procedure above. Instead, run the individual .NSH script file for each update included in the update package files. Follow the update order below to ensure a trouble free update:

Update BMC Firmware
1) Boot the system to the EFI shell and go to root folder
2) At the shell prompt, run "UpdateBMC.nsh" to start BMC Firmware update
3) When complete, go to the BIOS update section described below, or power off the system and cycle AC power before continuing.

Update System BIOS
1) Boot the system to the EFI shell and go to root folder
2) At the shell prompt, run "UpdateBIOS.nsh" to start BIOS update
3) When complete, reboot the system and enter BIOS Setup by pressing the F2 Key during POST
4) Verify the BIOS string on main BIOS menu
5) Press F9 to load defaults and press F10 to save and reset the system
6) Go to the ME firmware update section described below.
7) The BIOS update is complete. Either reboot the server or go to the ME firmware Update section described below.

Update ME Firmware
1) Boot the system to the EFI shell and go to root folder
2) At