SoftHub

This package provides the factory images "fugu" for Nexus Player.

Specifications:
- 1.8GHz Quad Core, Intel Atom
- 802.11ac 2x2 (MIMO)
- HDMI out

Requirements:
- TV with HDMI input & HDMI cable
- Internet connectivity (Wi-Fi only)

To flash a system image:

- Download the appropriate system image for your device below, then unzip it to a safe directory.
- Connect your device to your computer over USB.
- Start the device in fastboot mode with one of the following methods:
Using the adb tool: With the device powered on, execute:
adb reboot bootloader
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
- If necessary, unlock the device's bootloader by running:
fastboot oem unlock
The target device will show you a confirmation screen. (This erases all data on the target device.)
- Open a terminal and navigate to the unzipped system image directory.
- Execute the flash-all script. This script installs the necessary bootloader, baseband firmware(s), and operating system.

Once the script finishes, your device reboots. You should now lock the bootloader for security:
- Start the device in fastboot mode again, as described above.
Execute:
fastboot oem lock

Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.

About Firmware Package:

Before you even consider installing this firmware, go to the system information page of the device and make sure that the version currently installed on it isn’t newer or matching this one.

If you upgrade to this build, imaging devices can get printing and scanning quality improvements, new options added to the setup menu, feature enhancements, various fixes, as well as several other changes that can boost stability.

Considering the large number of devices and manufacturers, as well as the wide variety of methods for upgrading imaging units, we recommend that you read the installation steps and initiate a firmware update process only when you have familiarized yourself with the procedure.

In addition to that, it would be best if you perform this task in a steady power environment such as the one ensured by a UPS unit. Also, make sure you don’t power off the imaging device or use its buttons during the installation, in order to avoid any malfunctions.

Therefore, if you intend to apply this version, click the download button, and install the package. Remember to check with our website as often as possible so that you don’t miss a single new release.