SoftHub

BUG FIXES:

- Fixed system abnormal after replaying more than 10min with 16x speed.
- Fixed admin failed to delete the new created user logging to different interface (local/remote GUI).
- Fixed intercom may fail when switching to full screen display.
- Fixed modify video codec from H.264 to MJPEG via ONVIF may fail.
- Fixed some issue using ONVIF to configure encoding parameters via webGUI.
- Fixed GVR only enable one channel Motion Detection when configuring two cameras simultaneously.
- Fixed resource webpage stales after idle for a period of time.
- Fixed long time preview Google Chrome abnormal.
- Fixed web channel management in high resolution still get prompt “GVR does not support".
- Fixed WebGUI interface “start time” could be wrong during “import/export” operation.
- Fixed HDD management the replacement HDD synchronization too slow.
- Fixed Alarm Config page I/O alarm setting display issue.
- Fixed when using uPNP and RTSP using TCP port 554, the mapped external HTTP port is wrong.
- Fixed webGUI system log operation might abnormal when log was cleared.
- Fixed the progress bar not disappearing issue after HDD management operation like create volume.
- Fixed operation interface at Schedule might jump abnormally.
- Fixed cannot display syslog when searching syslog simultaneously at two webpages.
- Fixed remote user can still find the tag when searching even without privilege.
- Fixed remote playback failure when video file without SPS/PPS.
- Fixed when enable DDNS the network parameter can be saved blank.
- Fixed the webserver might stall after running for more than 4 days.
- Fixed local firmware upgrade may interrupt the local video preview.
- Fixed Chrome browser revise parameters then save them might have issue.
- Fixed some schedule name display issue when adding new schedule.
- Fixed factory reset could cause the system log not readable.
- Fixed at Channel Management after searching the cameras, click “Select All” the sequence messed up.
- Fixed the time setting displayed wrong when planning schedule at the “Schedule” setting page.
- Fixed modify and save 2nd stream parameters might not work as expected.
- Fixed the web preview display error of record and snapshot file path and tips.
- Fixed Mail delivery interval without unit of time stamp.
- Fixed the full box mark checked when searching the list of backups.
- Fixed no prompt when the path of “firmware file” is empty when using webGUI.
- Fixed IE8 webGUI the display got split.
- Fixed web preview the channels will display at left side when selecting channels to move via mouse.
- Fixed browser has to be closed when installing the plug-in controller.

ENHANCEMENTS:

- Synchronized mail setting interface on both webGUI and local GUI.
- Added reboot prompt after a successful firmware upgrade process.
- Improved the I/O alarm tooltips.
- Prompt added to webGUI when doing “import & export” configuration file operation.

HW Supported:

- GVR3550: 1.1A, 1.2A, 1.3A, 1.4A, 1.6A
- GVR3552: 1.0A, 1.1A, 1.2A, 1.3A, 1.4A, 1.5A.

About VoIP System Updates:

Firmware updates for VoIP Systems are very complex and usually contain many bug fixes, security improvements and compatibility enhancements, because the base system must be able to connect to webcams, video conference devices and the like.

Upgrading your VoIP System firmware should be done as often as possible to keep your device up to date with new security standards, and improve the native plug and play capabilities of your device.

Although beta firmware are usually full of new and exciting features, updating to them should only be done after thoroughly reading the changelog and making sure that you still retain phone functionality. Remember to check if you can revert to a more stable version as well, in case the new update is not what you were expecting.

If you intend to apply this update, please make sure that the package is compatible with your VoIP System, hit the download button, follow the installation instructions and enjoy. Check out our website as often as possible in order to keep your device “Updated one minute ago.”