SoftHub

Compatibility:

- SKC3007A/60GB
- SKC3007A/120GB
- SKC3007A/180GB
- SCK3007A/240GB
- SKC3007A/480GB

System Preparation:

- The SSD MUST be mounted as a secondary drive not as a boot drive
- You must be running Windows 8.1, 8, or 7 SP1 in AHCI mode in BIOS
- Intel RST driver and AMD AHCI users must switch to the standard Microsoft AHCI driver
- Use only native SATA ports for connecting the SSD

About SSD Toolbox:

The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD.

That being said, make sure this Toolbox version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don’t miss the release that can improve your SSD.