SoftHub

What's New:

- Increase standby duration to 72 hours before entering suspend mode (Power LED off)

Fixes:

- Intermittent firmware upgrade failure
- Auto shutdown during audio playback from Line In/Optical In
- Intermittent noise from Line In left channel
- USB Host compatibility with Sony Xperia Z Ultra, Sony Xperia Z3 and XiaoMi Mi3
- Left channel audio break when calibration of speaker distance is set below 2.2m
- Inaudible Bluetooth audio after streaming audio via USB Host for more than 30 minutes
- Bluetooth LED not blinking in pairing mode if there is an existing connected device
- Inaudible Bluetooth audio when pairing to a second device
- Unable to connect to a second Bluetooth device if an existing connected device has been streaming for more than 30 minutes
- Headphones not detected when first inserted
- X7 Control app running on iOS 9 unable to connect to Sound Blaster X7

To install this pack, do the following:

- Download the file onto your local hard disk.
- Double-click the downloaded file to uncompress it.
- Double-click the uncompressed DMG file.
- Double-click the Install icon and follow the instructions on screen.
- Upon successful firmware upgrade, shut down your device by pressing the Power button (LED off).
- Switch off the main power supply to the power adapter and unplug the power cable from your device.
- After 10 seconds, plug the power cable back into your device and switch on the main power supply.
- Turn your device back on by pressing the Power button (LED on).

About Sound Card Firmware:

Apply this firmware version to your sound card, and the device can receive improved audio quality, fixes for various issues, enhanced features, as well as several other changes that might boost the unit’s performance, stability and compatibility.

Before you even consider upgrading your sound card, make sure the modifications that are to be made through the present release suit your needs. Don’t get the downloadable package otherwise.

Because of the large number of models and manufacturers, as well as the different methods for updating the audio component, it is highly recommended that you read and understand the installation steps before you apply the new firmware.

In addition to that, it would be best if you perform the update in a steady power environment, such as the one ensured by a UPS unit.

Therefore, if this firmware satisfies your needs, get the desired version, and install it to your system; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.