SoftHub

Fixes:

- Fixed POSTing issue with certain kits of 2667 RAM
- Support NVMe device for bootable device.
- Allows user to disable CSM items directly. User doesn't need to change launch video mode.
- Fix USB Keyboard/Mouse can wake up system after shutdown on Window 8.
- Fix E5-1680 CPU instability issue.
- Fix ELEETX memory information read error.
- USB profile compatible with R114.

Windows Installation:

- Download the correct .zip file
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

BIOS Installation:

- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.