Описание | This package provides the necessary installation files for Yamaha TF Digital Mixer Firmware 2.01.Enhancements:- Now supports NY64-D option card for Dante Interface. Connection with Dante devices (such as Tio1608-D, R series, etc.) is available via the NY64-D. In addition, HA control is also available with Tio1608-D and R series.
Fixes:- Solved the problem in which some faders would rarely indicate slightly shifted values when operating the fader bank or SENDS ON FADER. - Solved the problem in which connecting a USB cable between Mac and the console while both are running would occasionally halt the signal processing, and the console would not restore until restarting it. - Solved the problem in which a message "Dante Version Mismatch" may appear for a few seconds when making patches from R series V3.11 (Rio3224-D, Rio1608-D, Ri8-D) via NY64-D by Dante Controller. - Solved some minor bugs.
Installation steps:1. Turn off the power to the TF series. 2. Connect the USB memory (formatted in FAT32) to the USB connector of your computer. 3. Copy the “TF_updater_v***.bin” (*** indicates the version number) in the folder extracted from the downloaded zip file to the root directory of the USB memory. 4. Remove the USB memory when the files have been copied. 5. Connect the USB memory to the TF USB connector (right side), then turn on the power to the TF series. An "Update firmware?" message will be displayed. 6. Touch the “Update” button to start loading the firmware. CAUTION пјљDO NOT OPERATE ANY CONTROL OF THE CONSOLE (SWITCHES, KNOBS, FADERS, ETC.) WHILE UPDATING THE FIRMWARE. Some update versions require the following additional steps (7 and 8) to update the [TFREC] module. 7. Wait for approximately two minutes, after the firmware has been loaded, the TF series automatically restarts and a "TFREC UPDATING..." message appears. While this message is shown, do not operate any of the console controls. 8. When a "TFREC UPDATE FINISH.” popup window (or similar message) appears, press the CLOSE button to close it. 9. Check the TF firmware version number from the version field in the “About” screen of the SYSTEM SETUP screen to confirm updating was completed. The firmware update is now complete.
About DJ Mixer Firmware:Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.
However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.
As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).
This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device. |